For Paved Roads
Temperature Formula DM Ultra - 29%
To ensure that
customers receive cold weather performance,
Pollard uses psecially blended calcium or calcium/magnesium blends diluted to suitable strength at
distribution points to meet seasonal customer
Products can be blended to offer a eutectic (Freeze Point) of -47C (-53 F) for trouble free handling and performance in cold climates.
Low temperature Mastermelt
With a eutectic (Freezing Point) Below -31 C (-24 F) the Mastermelt blend offers snow and ice control at
temperatures where straight sodium brine would be impossible to handle.
can be applied at speeds between 49 and 80 km/hr
(25 to 50 mph) thereby avoiding traffic
congestion during the application process.
As application rates and product solutions will vary with road conditions, surface temperatures, air temperatures and precipitation expected, you should contact Pollard Marketing to discuss specific needs.
Pre-Wetting Salt and
Liquid Calcium/Magnesium Choride, Mastermelt and
Liquid Sodium Chloride are products that Pollard offers for "pre-wetting" salt
or abrasives to yield better performance at
Municipalities are realizing significant
economic and environmental benefits, additional
road safety and better salt effectiveness through the
use of chloride based liquids. Such are
applied as direct liquid application on paved
surfaces or are used to pre-wet salt before or
during its spreading on roads.
Applications demand careful attention to road
and weather conditions and application rates to
get best road results without compromising